Latest Post
Exams Cisco
CCNA1 - v7
CCNA2 - v7
CCNA3 - v7
CCNA v7 - Bridging
CCNA1 - v7
CCNA 1 – Introduction to Networks v7.02 (ITN)
|
CCNA 1 (ITN v7.0) Packet Tracer Activity (Answers) |
|---|
| 1.5.7 Packet Tracer – Network Representation |
| 2.3.7 Packet Tracer – Navigate the IOS |
| 2.5.5 Packet Tracer – Configure Initial Switch Settings |
| 2.7.6 Packet Tracer – Implement Basic Connectivity |
| 2.8.1 Video Activity – Test the Interface Assignment |
| 2.8.2 Video Activity – Test End-to-End Connectivity |
| 2.9.1 Packet Tracer – Basic Switch and End Device Configuration |
| 3.5.5 Packet Tracer – Investigate the TCP-IP and OSI Models in Action |
| 4.6.5 Packet Tracer – Connect a Wired and Wireless LAN |
| 4.7.1 Packet Tracer – Connect the Physical Layer |
| 9.1.3 Packet Tracer – Identify MAC and IP Addresses |
| 9.2.9 Packet Tracer – Examine the ARP Table |
| 9.3.4 Packet Tracer – IPv6 Neighbor Discovery |
| 10.1.4 Packet Tracer – Configure Initial Router Settings |
| 10.3.4 Packet Tracer – Connect a Router to a LAN |
| 10.3.5 Packet Tracer – Troubleshoot Default Gateway Issues |
| 10.4.3 Packet Tracer – Basic Device Configuration |
| 11.5.5 Packet Tracer – Subnet an IPv4 Network |
| 11.7.5 Packet Tracer – Subnetting Scenario |
| 11.9.3 Packet Tracer – VLSM Design and Implementation Practice |
| 11.10.1 Packet Tracer – Design and Implement a VLSM Addressing Scheme |
| 12.6.6 Packet Tracer – Configure IPv6 Addressing |
| 12.9.1 Packet Tracer – Implement a Subnetted IPv6 Addressing Scheme |
| 13.2.6 Packet Tracer – Verify IPv4 and IPv6 Addressing |
| 13.2.7 Packet Tracer – Use Ping and Traceroute to Test Network Connectivity |
| 13.3.1 Packet Tracer – Use ICMP to Test and Correct Network Connectivity |
| 14.8.1 Packet Tracer – TCP and UDP Communications |
| 16.4.6 Packet Tracer – Configure Secure Passwords and SSH |
| 16.5.1 Packet Tracer – Secure Network Devices |
| 17.5.9 Packet Tracer – Interpret show Command Output |
| 17.7.7 Packet Tracer – Troubleshoot Connectivity Issues |
| 17.8.2 Packet Tracer – Skills Integration Challenge |
| 17.8.3 Packet Tracer – Troubleshooting Challenge |
|
CCNA 1 (ITN v7.0) Instruction Labs (Answers) |
|---|
| 1.9.3 Lab – Research IT and Networking Job Opportunities |
| 2.3.8 Lab – Navigate the IOS by Using Tera Term for Console Connectivity |
| 2.9.2 Lab – Basic Switch and End Device Configuration |
| 3.0.3 Class Activity – Design a Communications System |
| 3.4.4 Lab – Research Networking Standards |
| 3.7.9 Lab – Install Wireshark |
| 3.7.10 Lab – Use Wireshark to View Network Traffic |
| 4.6.6 Lab – View Wired and Wireless NIC Information |
| 7.1.6 Lab – Use Wireshark to Examine Ethernet Frames |
| 7.2.7 Lab – View Network Device MAC Addresses |
| 7.3.7 Lab – View the Switch MAC Address Table |
| 10.4.4 Lab – Build a Switch and Router Network |
| 11.6.6 Lab – Calculate IPv4 Subnets |
| 11.10.2 Lab – Design and Implement a VLSM Addressing Scheme |
| 12.7.4 Lab – Identify IPv6 Addresses |
| 12.9.2 Lab – Configure IPv6 Addresses on Network Devices |
| 13.3.2 Lab – Use Ping and Traceroute to Test Network Connectivity |
| 15.4.8 Lab – Observe DNS Resolution |
| 16.2.6 Lab – Research Network Security Threats |
| 16.4.7 Lab – Configure Network Devices with SSH |
| 16.5.2 Lab – Secure Network Devices |
| 17.4.6 Lab – Test Network Latency with Ping and Traceroute |
| 17.7.6 Lab – Troubleshoot Connectivity Issues |
| 17.8.1 Lab – Design and Build a Small Network |
| Lab – Initialize and Reload a Router and Switch |
CCNA2 - v7
CCNA 2 – Switching, Routing, and Wireless Essentials v7.02 (SRWE)
|
CCNA 2 (SRWE v7.0) Packet Tracer Activity (Answers) |
|---|
| 1.3.6 Packet Tracer – Configure SSH |
| 1.4.7 Packet Tracer – Configure Router Interfaces |
| 1.5.10 Packet Tracer – Verify Directly Connected Networks |
| 1.6.1 Packet Tracer – Implement a Small Network |
| 3.1.4 Packet Tracer – Who Hears the Broadcast? |
| 3.2.8 Packet Tracer – Investigate a VLAN Implementation |
| 3.3.12 Packet Tracer – VLAN Configuration |
| 3.4.5 Packet Tracer – Configure Trunks |
| 3.5.5 Packet Tracer – Configure DTP |
| 3.6.1 Packet Tracer – Implement VLANs and Trunking |
| 4.2.7 Packet Tracer – Configure Router-on-a-Stick Inter-VLAN Routing |
| 4.3.8 Packet Tracer – Configure Layer 3 Switching and Inter-VLAN Routing |
| 4.4.8 Packet Tracer – Troubleshoot Inter-VLAN Routing |
| 4.5.1 Packet Tracer – Inter-VLAN Routing Challenge |
| 5.1.9 Packet Tracer – Investigate STP Loop Prevention |
| 6.2.4 Packet Tracer – Configure EtherChannel |
| 6.3.4 Packet Tracer – Troubleshoot EtherChannel |
| 6.4.1 Packet Tracer – Implement Etherchannel |
| 7.2.10 Packet Tracer – Configure DHCPv4 |
| 7.4.1 Packet Tracer – Implement DHCPv4 |
| 9.3.3 Packet Tracer – HSRP Configuration Guide |
| 11.1.10 Packet Tracer – Implement Port Security |
| 11.6.1 Packet Tracer – Switch Security Configuration |
| 13.1.10 Packet Tracer – Configure a Wireless Network |
| 13.2.7 Packet Tracer – Configure a Basic WLAN on the WLC |
| 13.3.12 Packet Tracer – Configure a WPA2 Enterprise WLAN on the WLC |
| 13.4.5 Packet Tracer – Troubleshoot WLAN Issues |
| 13.5.1 Packet Tracer – WLAN Configuration |
| 14.3.5 Packet Tracer – Basic Router Configuration Review |
| 15.6.1 Packet Tracer – Configure IPv4 and IPv6 Static and Default Routes |
| 16.3.1 Packet Tracer – Troubleshoot Static and Default Routes |
|
CCNA 2 (SRWE v7.0) Instruction Labs (Answers) |
|---|
| 1.1.7 Lab – Basic Switch Configuration |
| 1.6.2 Lab – Configure Basic Router Settings |
| 3.4.6 Lab – Configure VLANs and Trunking |
| 3.6.2 Lab – Implement VLANs and Trunking |
| 4.2.8 Lab – Configure Router-on-a-Stick Inter-VLAN Routing |
| 4.4.9 Lab – Troubleshoot Inter-VLAN Routing |
| 4.5.2 Lab – Implement Inter-VLAN Routing |
| 6.4.2 Lab – Implement Etherchannel |
| 7.4.2 Lab – Implement DHCPv4 |
| 8.5.1 Lab – Configure DHCPv6 |
| 11.6.2 Lab – Switch Security Configuration |
| 13.1.11 Lab – Configure a Wireless Network |
| 15.6.2 Lab – Configure IPv4 and IPv6 Static and Default Routes |
| 16.3.2 Lab – Troubleshoot IPv4 and IPv6 Static and Default Routes |
CCNA3 - v7
Enterprise Networking, Security, and Automation v7.02 (ENSA)
|
CCNA 3 (ENSA v7.0) Packet Tracer Activity (Answers) |
|---|
| 2.2.13 Packet Tracer – Point-to-Point Single-Area OSPFv2 Configuration |
| 2.3.11 Packet Tracer – Determine the DR and BDR |
| 2.4.11 Packet Tracer – Modify Single-Area OSPFv2 |
| 2.5.3 Packet Tracer – Propagate a Default Route in OSPFv2 |
| 2.6.6 Packet Tracer – Verify Single-Area OSPFv2 |
| 2.7.1 Packet Tracer – Single-Area OSPFv2 Configuration |
| 4.1.4 Packet Tracer – ACL Demonstration |
| 5.1.8 Packet Tracer – Configure Numbered Standard IPv4 ACLs |
| 5.1.9 Packet Tracer – Configure Named Standard IPv4 ACLs |
| 5.2.7 Packet Tracer – Configure and Modify Standard IPv4 ACLs |
| 5.4.12 Packet Tracer – Configure Extended IPv4 ACLs – Scenario 1 |
| 5.4.13 Packet Tracer – Configure Extended IPv4 ACLs – Scenario 2 |
| 5.5.1 Packet Tracer – IPv4 ACL Implementation Challenge |
| 6.2.7 Packet Tracer – Investigate NAT Operation |
| 6.4.5 Packet Tracer – Configure Static NAT |
| 6.5.6 Packet Tracer – Configure Dynamic NAT |
| 6.6.7 Packet Tracer – Configure PAT |
| 6.8.1 Packet Tracer – Configure NAT for IPv4 |
| 7.6.1 Packet Tracer – WAN Concepts |
| 10.1.5 Packet Tracer – Use CDP to Map a Network |
| 10.2.6 Packet Tracer – Use LLDP to Map a Network |
| 10.3.4 Packet Tracer – Configure and Verify NTP |
| 10.6.10 Packet Tracer – Back Up Configuration Files |
| 10.7.6 Packet Tracer – Use a TFTP Server to Upgrade a Cisco IOS Image |
| 10.8.1 Packet Tracer – Configure CDP, LLDP, and NTP |
| 11.5.1 Packet Tracer – Compare Layer 2 and Layer 3 Devices |
| 12.5.13 Packet Tracer – Troubleshoot Enterprise Networks |
| 12.6.1 Packet Tracer – Troubleshooting Challenge – Document the Network |
| 12.6.2 Packet Tracer – Troubleshooting Challenge – Use Documentation to Solve Issues |
|
CCNA 3 (ENSA v7.0) Instruction Labs (Answers) |
|---|
| 2.7.2 Lab – Configure Single-Area OSPFv2 |
| 3.5.7 Lab – Social Engineering |
| 3.8.8 Lab – Explore DNS Traffic |
| 5.5.2 Lab – Configure and Verify Extended IPv4 ACLs |
| 6.8.2 Lab – Configure NAT for IPv4 |
| 7.5.11 Lab – Research Broadband Internet Access Technologies |
| 10.4.10 Lab – Research Network Monitoring Software |
| 10.6.11 Lab – Use Tera Term to Manage Router Configuration Files |
| 10.6.12 Lab – Use TFTP, Flash, and USB to Manage Configuration Files |
| 10.6.13 Lab – Research Password Recovery Procedures |
| 10.8.2 Lab – Configure CDP, LLDP, and NTP |
| 13.6.1 Lab – Install Linux in a Virtual Machine and Explore the GUI |
CCNA v7 - Bridging
CCNA 2 – CCNAv7 (SRWE) Bridging Course Content
The CCNAv7: Switching, Routing, and Wireless Essentials (SRWE) Bridging course content is for learners who have completed CCNAv6 RSE course and plan to take the Cisco Certified Network Associate v2.0 (CCNA 200-301) Certification exam. This bridging course contains four modules that focus on LAN security, securely configuring switches to mitigate attacks, and wireless LAN concepts and configuration.
| CCNA 2 – CCNAv7 (SRWE) Bridging Course Content |
|---|
| CCNAv7 (SRWE) Bridging Curriculum |
| Module 10: LAN Security Concepts |
| Module 11: Switch Security Configuration |
| Module 12: WLAN Concepts |
| Module 13: WLAN Configuration |
| CCNAv7 (SRWE) Bridging Packet Tracer Activity |
| 11.1.10 Packet Tracer – Implement Port Security |
| 11.6.1 Packet Tracer – Switch Security Configuration |
| 13.1.10 Packet Tracer – Configure a Wireless Network |
| 13.2.7 Packet Tracer – Configure a Basic WLAN on the WLC |
| 13.3.12 Packet Tracer – Configure a WPA2 Enterprise WLAN on the WLC |
| 13.4.5 Packet Tracer – Troubleshoot WLAN Issues |
| 13.5.1 Packet Tracer – WLAN Configuration |
| CCNAv7 (SRWE) Bridging Labs |
| 11.6.2 Lab – Switch Security Configuration |
| 13.1.11 Lab – Configure a Wireless Network |
CCNA 3 – CCNAv7 (ENSA) Bridging Course Content
The CCNAv7: Enterprise Networking, Security, and Automation (ENSA) Bridging course content is for learners who have completed CCNAv6 ScaN course and plan to take the Cisco Certified Network Associate v2.0 (CCNA 200-301) Certification exam. This bridging course contains three modules that focus on network security concepts, VPN and IPsec concepts, and automation.
| CCNA 3 – CCNAv7 (ENSA) Bridging Course Content |
|---|
| CCNAv7 (ENSA) Bridging Curriculum |
| Module 3: Network Security Concepts |
| Module 8: VPN and IPsec Concepts |
| Module 14: Network Automation |
| CCNAv7 (ENSA) Bridging Labs |
| 3.5.7 Lab – Social Engineering |
| 3.8.8 Lab – Explore DNS Traffic |
Cisco Courses
Networking
Networking Essentials
CCNA: Introduction to Networks
CCNA: Switching, Routing, and Wireless Essentials
CCNA: Enterprise Networking, Security, and Automation
CCNP Enterprise: Advanced Routing
CCNP Enterprise: Core Networking
Cybersecurity
Introduction to Cybersecurity
Cloud Security
CyberOps Associate
CyberOps Associate
IoT Fundamentals: IoT Security
Network Security
IoT
Introduction to IoT
IoT Fundamentals: Big Data & Analytics
IoT Fundamentals: Connecting Things
IoT Fundamentals: Hackathon Playbook
Infrastructure Automation
DevNet Associate
Workshop: Model-Driven Programmability
Workshop: REST APIs using Webex Teams
OS IT
Get Connected
NDG Linux Unhatched
NDG Linux Unhatched
IT Essentials
NDG Linux Essentials
NDG Linux I
NDG Linux II
Programming
JavaScript Essentials 1
CLA: Programming Essentials in C
CPA: Programming Essentials in C++
PCAP: Programming Essentials In Python
CLP: Advanced Programming in C
CPP: Advanced Programming in C++
Business
Entrepreneurship
Packet Tracer
Intro to Packet Tracer
Ads Blocker Detected!!!
We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.
Translate »